Everpure IN-10 EV9100-08 - Manual (Page 2)

IN-10 In-line Filter
Overall Dimensions:
Length: 10.5”
Diameter: 2.0"
Inlet connection: 1/4”
Outlet connection: 1/4”
Service Flow Rate:
Maximum 0.75 gpm (2.8 Lpm)
Pressure Requirements:
10 - 125 psi (0.7 – 8.6 bar), non-shock
Temperature:
35 - 100°F (2 - 38°C)
Operating Weight:
1.5 lbs.
No electrical connection required
The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
In-line Filter
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.