Playing cassette tapes – Emerson Radio PD3500RD User Manual
Page 23

2 2
PLAYING CASSETTE TAPES
1.) Press the POWER button to turn the system ‘On’.
2.) Press the FUNCTION button to select TAPE
mode. The TAPE indicator appears.
3.) Open the cassette door by lifting the PULL OPEN tab on the top cover.
4.) Place a pre-recorded cassette tape onto the
cassette compartment as shown and the
full reel on the left side.
Close the cassette door.
5.) Press the cassette PLAY
key to begin playback.
6.) Adjust the VOLUME
/
and EQ controls as desired.
7.) To advance the tape rapidly press the F. FWD
key. When you reach the
desired point press the STOP
key..
8.) To rewind the tape rapidly press the REWIND
key. When you reach the
desired point press the STOP
key..
9.) When the tape ends the Automatic Stop System releases the PLAY
key
and shuts off the tape motor. You may then open the cassette door, press the
STOP
button again to eject your tape, turn it over and play the other side if
desired.
10.) When you are finished listening press the STOP
key to stop.
Open the door, press the STOP
key again to eject and remove the tape,
then close the door.
PD3500RD_102904.p65
29/10/2004, 15:36
22