Emerson Radio PD3500RD - Manual (Page 11)

1 0
SETTING THE CLOCK
When the unit is connected to the AC outlet for
the first time the “– –:– –” flashes on the display.
Note: Do not turn the main unit power ‘On’. The clock can only be set while the
main unit power is ‘Off’.
1.) Press and hold the PROG. button on the
front panel. “12H” flashes on display.
Press SKIP / buttons to select between
“24H” 24 hour or “12H” 12 hour modes.
2.) Press the PROG. button on the front panel
again. Just the Hour digits will continue
flashing.
3.) Press the SKIP / buttons on the top panel to set the display to the correct
hour, AM or PM.
4.) Press the PROG. button again. The
Minute digits will begin flashing.
5.) Press the SKIP / buttons on the top panel to set the display to the correct
minutes.
6.) Press the PROG. button once more. The
time display stops flashing and the clock
begins to run.
PD3500RD_102904.p65 29/10/2004, 15:36 10