Euro-Pro EP325 - Manual (Page 7)

Bun Warmer Rack (12):
The Bun Warmer Rack (12)can be used to crisp buns which have become limp or to warm
rolls or croissants that are too large to fit inside the toaster slot(s). For faster warming or to
prevent over browning, cut the bun/roll in half.
Note: Foods being warmed or crisped should not completely cover the toaster top, allow
space for adequate air flow.
Important: Do not place food containers such as plates or foil
pans on top of the Bun Warmer Rack (12).
1. Lift Bun Warmer Lever (13). (Fig. 1)
2. Center the food on the Bun Warmer Rack (12).
3. Set the Browning Control Knob (2) to position 4-5 for crisping or lower for warming.
4. Press down the Bread Carriage Lever (3). The Power On Light (9) will come on.
5. When cycle is completed, carefully remove the crisp/warm food from the Bun Warmer
Rack (12).
6. Lower the Bun Warmer Rack (12) by pressing the Bun Warmer Lever (13) down when
finished using and during regular toasting. The Bun Warmer Rack (13) should be at the rest
position when toasting bread in the Bread Slot(s) (1). Never put bread in the Bread Slot(s) (1)
while heating buns on the Bun Warmer Rack (12).
7. When finished using the unit, unplug the toaster from the electrical outlet and let cool
thoroughly before cleaning and storing.
5
Fig. 1
Warning: Never put bread in the Bread Slot(s) (1) while
heating buns on the Bun Warmer Rack (12).
Lift