Euro-Pro EP325 - Manual (Page 6)

Tips on Toasting:
Please note that when toasting different breads the different moisture levels from one type to
another can result in varying toasting times.
• If bread is slightly dry, use a lower setting than you normally would.
• For very fresh bread or whole wheat bread, use a higher setting than normal.
• Breads with uneven surfaces (such as English muffins) will require a longer toasting time.
• When toasting raisin or other fruit bread, remove any loose fruit from the surface before placing
into the toaster. This will prevent them from falling into the bottom or sticking to the guard
wires in the slots.
• Sweet bread products (tea cakes, raisin bread, etc.) brown much quicker than regular
bread, and should be toasted on the lighter settings.
• Thick slices of bread (1/2” to 1” in thickness) may require 2 cycles of toasting.
• Do not use torn, curled up or misshapen slices of bread as these may jam the ejection
mechanism and could catch fire.
Defrosting:
The Defrost Button (6) is designed to first defrost and then toast the bread - this slightly extends the
toasting cycle.
1. Plug toaster into electrical wall outlet.
2. Insert slice(s) of bread into toaster,
3. Set the Browning Control Knob (2) to desired setting:
• Setting 1-3: Refrigerated breads and thinner frozen items such as pancakes.
• Setting 3-5: Toaster pastries, frozen waffles and refrigerated bagels.
• Setting 5-7: Thicker frozen items such as bagels, hand cut breads and thick French Toast.
4. Press the Bread Carriage Lever (3) until it locks into position and the Power On Light (9)
comes on.
5. Press the Defrost Button (6), Defrost Light (7) will come on. Bread will defrost first, and then
go right into toasting cycle.
6. When the Defrost/Toasting Cycle is complete, the toaster will raise the bread. If you wish to
stop the cycle before it is finished, simply press the Cancel Button (8) to interrupt.
7. After use, unplug the toaster from the electrical outlet and let cool thoroughly before cleaning
and/or storing.
Reheating:
1. Plug toaster into wall electrical outlet.
2. Insert bread into slot(s).
3. Press the Bread Carriage Lever (3) until it locks into position and Power On Light (9) comes
on.
4. Press Reheat Button (4) once. Reheat Light (5) will come on.
5. Bread will pop up after the Reheating cycle is complete. Bread Carriage Lever (3) may
be raised to allow for smaller items to be easily removed after Reheating cycle is completed.
6. After use, unplug the toaster from the electrical outlet and let cool thoroughly before
cleaning and/or storing.
Note: You do not have to set the Browning Control Knob (2) for this cycle.
Warning: Never use metal utensils to remove bread from toaster.
4