Making a tape recording – Emerson Radio PD9814 User Manual

Page 19

1 8

IMPORTANT:

Always press the

Stop/Eject key to shut off the tape motor before opening

the cassette door to remove your tape. The Automatic Stop System does not

function in the

F.Fwd and

Rewind modes. When the tape ends in the

F.Fwd and

Rewind modes the motor continues to run. You must press

the

Stop/Eject key to shut off the motor before opening the door to remove

your tape.

Making A Tape Recording

This model allows you to make tape recordings directly from the CD player, or the

radio.

• Refer to “Playing Compact Discs” if necessary to operate the CD player.

• Refer to “Listening To The Radio” if necessary to tune in the station you

wish to record from radio.

1.) Press the

Stop/Eject

ct key to open the cassette door.

2.) Insert a good quality blank cassette tape into the slots on the cassette door

with the open end facing down and the full reel on the left. Use normal tape

only. Do not use tape identified as “CrO

” (Chrome) or “Metal” tape formulations.

For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute

or 120 minute tapes as these thinner tapes are more likely to jam in the

mechanism.

3.) Close the cassette door.

4.) When you are ready to start recording press the

Record key. The

Play

key will also engage. The CD you are playing, or radio program you selected

will be recorded directly on to the tape.

5.) Press the

Pause key during recording to stop the tape temporarily and avoid

recording unwanted material such as radio commercials.

6.) When you have finished recording press the

Stop/Eject

ct key to stop and

remove the tape.

PD9814_053105.p65

31/5/2005, 10:31