Emerson Radio PD9814 - Manual (Page 16)

1 5
Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the (Stop) button to stop playback before you begin the programming
steps below.
1.) Move the FUNCTION selector to CD position, insert your disc in the player,
close the door, and wait until the total track number, playing time appear in the
display.
2.) Press the PROG button once. The PROGRAM indicator
and program memory “00” begin flashing and “P-01” appears
in the display.
3.) Use the or buttons to select the first track to be
programmed. (Example: Track 07).
4.) When track number “07” flashes in the display, press the
PROG button once again to enter the track “07” in program
memory number “01”.
Track number “07” disappears and “00” flashes again in the
display, “P-02” appears indicating that you may now select
a track to be entered in program memory number “02”.
5.) Use the or buttons to select the next track to be programmed. When
the desired track number appears in the display press the PROG button again
to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
7.) To begin programmed playback press the button. The
LCD display will show the first programmed track and
playback will begin on that track. The PROGRAM indicator
appears.
After the last programmed track has played the player stops and the programmed
tracks are deleted from the memory automatically.
PD9814_053105.p65 31/5/2005, 10:31 15