Emerson Radio PD9814 - Manual (Page 18)

1 7
Playing Cassette Tapes
1.) Open the cassette door by pressing the Stop/Eject key..
2.) Place a pre-recorded cassette tape with the exposed tape facing down and the
full reel on the left side.
3.) Move the FUNCTION selector to the TAPE-OFF position.
4.) Press the cassette Play key to begin playback.
5.) Set the VOLUME and BASS BOOST controls as desired.
6.) To advance the tape rapidly press the F.Fwd key. To stop the tape before it
ends press the Stop/Eject key..
7.) To rewind the tape rapidly press the Rewind key. To stop the tape before it
ends press the Stop/Eject key..
8.) When the tape ends the Automatic Stop System releases the Play key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
9.) When you are finished listening stop the tape, open the door, remove the tape
and close the door.
If you are playing a tape and then switch to the RADIO or CD function be sure
to press the Stop/Eject key to disengage the tape mechanism. This prevents
excess wear and tear on the mechanism.
PD9814_053105.p65 31/5/2005, 10:31 17