Powerplus POWXQ5335 TELESC. MITRE SAW 1800W 254MM EN - Manual (Page 3)

POWXQ5335 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
SLIDING MITRE SAW 1800W
POWXQ5335
1 APPLICATION
This power tool is intended as a stationary machine for making straight and cross cuts in wood.
You can saw hard and soft wood as well as chip and fibre boards.
Only adults may use this tool.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION
1. Protective hood
2. Saw blade
3. Side support bar
4. Fence
5. Saw table
6. Lever
7. Table insert
8. Scale for mitre angle (horizontal)
9. Mounting hole
10. Distance stopper
11. Tightening screws
12. Clamp
13. ON / OFF switch laser
14. Slide bar
15. Operating handle
16. ON / OFF switch
17. Safety switch
18. Handle
19. Locking knob
20. Dust collection bag
21. Angle scale
22. Angle lock knob
23. Slide bar lock
24. Extension hoop screws
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packaging and packing inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING! Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
In this packaging, you can find:
Sliding mitre saw
1pc 3mm hex spanner,
1set clamp
5pcs foot pad
Manual
1 wrench
2 side guides
2 Distance stopper
1 dust bag
1 handle
1 XQ catalogue
If any parts are missing or damaged, please contact your dealer.