Powerplus POWXG1031 TELESCOPIC CHAINSAW 900W 300MM 3-IN-4 EN - Manual (Page 10)

POWXG1031 EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
15 TROUBLESHOOTING
FAULT CAUSE REMEDY
Motor does not
run No electricity Check socket, cable and plug .
Damaged cable: Have repaired by
Customer Service. It is prohibited to patch
the cable with insulating tape .
Damaged switches have to be replaced
by a Customer Service workshop.
Running out of carbon
brush Change the carbon brush, ask a
Customer Service workshop
Poor cutting
performance Blunt chain Sharpen the chain
Chain tension Chain wrongly fitted
Check that the chain is
fitted correctly Check the chain tension
Saw works only
with difficulty Chain tension Check the chain tension
Chain jumps off
sword
Chain becomes
hot Chain lubrication Check oil level
Check Chain lubrication
16 TECHNICAL DATA
Type POWXG1031
Rated voltage/frequency 230-240V~ 50Hz
Rated power 900W
Bar length 12
” (300mm)
No load chain speed 15m/s
Tank capacity of lubricating oil 100 ml
Protection class II
Weight 5.0 kg
17 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 96 dB(A)
Acoustic power level LwA 108 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration): 6.5 m/s² K = 1.5 m/s²
18 STORAGE
Keep your chain saw in a safe place. The unused chainsaw should be stored clean, on a flat
surface and in a dry place which is inaccessible to children.