Powerplus POWX320 VACUUM CLEANER WET/DRY 800W EN - Manual (Page 5)

POWX320
EN
Copyright © 2013 VARO P a g e | 5 www.varo.com
 Use safety equipment. Always wear eye protection. Using safety equipment such as a dust
mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will
reduce the risk of personal injury.
 Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
 Remove any adjusting keys or spanners before turning on the power tool. A spanner or key
left attached to a rotating part of the power tool may result in personal injury.
 Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you
retain control over the power tool in unexpected situations.
 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from the power tool. Loose clothes, jewellery or long hair can become entangled in
the moving parts.
 If there are devices for connecting dust extraction and collection facilities, please ensure that
they are attached and used correctly. Using such devices can reduce dust-related
hazards.
Power tool use and care
 Do not expect the power tool to do more than it can. Use the correct power tool for what you
want to do. A power tool will achieve better results and be safer if used in the context for
which it was designed.
 Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store power tools, when not in use, out of the reach of children and do not allow people who
are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
 Use the power tool, accessories and cutting tools, etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work which needs to be done. Using a power tool in ways for
which it was not intended can lead to potentially hazardous situations.
Service
 Your power tool should be serviced by a qualified specialist using only standard spare parts.
This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY WARNINGS
 Do not vacuum up highly inflammable liquids, acids or thinners.
 Do not vacuum up water at a temperature above 60 °C.
 Do not vacuum up toxic substances.
 Never vacuum up dry waste material or dust without dust filter in place.
 Check whether the dust filter has been removed when using the machine far vacuuming up
liquids.
 If you use an extension cord, it must be of a watertight construction.