Powerplus POWX311 VACUUM CLEANER WET/DRY 1000W EN - Manual (Page 4)

POWX311
EN
Copyright © 2008 VARO P a g e | 4 www.varo.com
§ Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
§ Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
§ Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
§ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
§ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
§ Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from
intended could lead to a hazardous situation.
4.5 Service
§ Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
5 SPECIFIC SAFETY WARNINGS
§ Do not switch the appliance on without correctly inserting the filter and the motor.
§ During use, always unravel the power cord to at least two-thirds of its length to avoid a
tripping hazard.
§ Do not operate the appliance on hot surfaces or at high temperatures.
§ Do not operate the appliance if the accessories are blocked. Keep the appliance and
accessories free of dust, fluff, hairs, … to maintain a free air flow.
§ Do not leave the appliance running unattended, turn power supply off.
§ This appliance cannot be used for suck up the sawdust, wood .
CAUTION
The appliance should not be used for absorption of the following materials:
§ Hazardous substances/dust that can damage your health.
§ Pointed, sharp or very large objects. Remove these from the area to be vacuumed.
§ Flammable or explosive fluids (such as gasoline). Do not operate the appliance close to
such materials.
§ Printer toners (of printers or copy machines). These are conductive and can damage the
appliance.
§ Burning or smoking objects, such as cigarettes, matches or warm ash.
6 ASSEMBLY
6.1 Correct nozzle selection
Floor brush (15) Used to clean large areas such as floor, carpets, …
Liquids adaptor (16) Used to collect water, cement or other non-volatile substances
Upholstery nozzle (18) Used to remove the deeply imbedded dirt
Crevice tool (19) Used to clean heaters, edges, corners. Also to vacuum large
quantities of liquids.
Dusting brush (20) Used on clean small areas such as windows of the corners of the
floor.