Powerplus POWX139 FILE / BELT SANDER 400W EN - Manual (Page 9)

POWX139 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
8.3 Speed controller

The speed can be adjusted
between 300 m/min and 1700
m/min through rotating the
speed controller from 1 to 6.

Adjusting the controller from 1 to
6 will accelerate.
 Adjusting the controller from 6 to
1 will slow down.
 Please choose the right speed
according to the work piece.
8.4 Sanding operation
 Secure the work piece to
prevent it from moving under the sander
belt.
 When starting or stopping the machine, do
not let the tool contact with the work piece.
Otherwise, it will result the damage of the
sander belt or it will make the machine
getting out of control.

When operating the machine, be careful to
avoid any part of your body to come into
contact with any of the moving parts of the
machine or belt.

Hold the machine with both hands in front
of you and away from you, and assume a
balanced posture.
 Press the main switch and allow the motor
to reach full speed. Hold the machine
parallel to the work piece. Gently bring the
belt in contact with the work piece. Do not
force tool. The weight of the sander supplies
adequate pressure. Applying additional
pressure will slow down the motor, rapidly
wear out the sanding belt and reduce the
sanding speed a lot.
 Avoid contact with the sanding belt at any
time.
8