Powerplus POWX139 FILE / BELT SANDER 400W EN - Manual (Page 4)

POWX139 EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
5.4 Power tool use and care
 Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
 Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.

Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power
tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
 Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
 Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
 Always hold the tool with it’s insulated grip.

The operator should hold the tool with two hands firmly.
 Make sure the tool is switched on before you touch the workpiece with the sanding belt.
 Do not touch any rotating components of the tool.
 This machine is not waterproof, so do not add water at the surface of work piece.
 When it comes to sanding operations, it is necessary to ensure a well-ventilated work
area.
 Some of the material contained in the compounds may be toxic.
 Be sure to use the dust masks / respirators corresponding of the material being
processed.