Installation and removal of belt, Belt adjustment path, Connect the dust bag – Powerplus POWX139 FILE / BELT SANDER 400W EN User Manual
Page 7

POWX139
EN
Copyright © 2014 VARO
P a g e
| 7
www.varo.com
7.2
Installation and removal of belt
Make sure the machine is turned off and
unplugged before installing or removing
the belt.
Pull the tension spanner to the back. Put
the belt on the driving wheel and pull the
belt to the front of the arm, and then
make the belt slip to the belt wheel
before pulling the tension spanner back
to the forward position.
7.3
Belt adjustment path
Check if the sanding belt is running centrally
before starting the work.
Run the file at no load speed and turn the
centralizing knob either clockwise or anti-
clockwise to adjust the belt tracking until the
sanding belt is running smooth.
7.4
Connect the dust bag
This machine is fitted with a dust extraction
outlet and a collection bag.
We recommend using this facility is at all
times, as well as using an approved face
mask. It will make you work cleaner.
First place the extraction outlet, and then fit
the dust collection bag onto the outlet.
2
k
n
o
b
3
9
A
d
j
u
s
t
a
b
l
e
k
n
o
b
3
k
n
o
b
1
10
11
5
k
n
o
b
- POW30002 IMPACT DRILL 500W EN (9 pages)
- POWAIR0802 PNEUMATIC DRILL/SCREWDRIVER EN (9 pages)
- POWAIR0014 PNEUMATIC SANDBLASTING GUN EN (12 pages)
- POWAIR0020 PNEUMATIC TOOL SET 5PCS EN (7 pages)
- POWAIR0106 PAINT SPRAY GUN 750CC 750CC EN (9 pages)
- POWAIR0110 PAINT SPRAY GUN 1000CC EN (8 pages)
- POWAIR0310 PNEUMATIC STAPLER/NAILER EN (8 pages)
- POWAIR0340 PNEUMATIC NAILER EN (8 pages)
- POWAIR0311 PNEUMATIC STAPLER/NAILER EN (8 pages)
- POWAIR0805 PNEUMATIC MULTI-USE TOOL EN (10 pages)
- POWAIR0806 PNEUMATIC STAPLER/NAILER EN (7 pages)
- POWX1345 MULTI-USE TOOL 300W EN (9 pages)
- POWXQ5235 DRILL/SCREWDRIVER 18V LI-ION 2 BATT EN (12 pages)
- POWXQ5107 ANGLE GRINDER 2450W 230MM EN (12 pages)
- POWXQ5107 ANGLE GRINDER 2450W 230MM EN (12 pages)
- POWXQ5203 IMPACT DRILL 850W EN (11 pages)
- POW462 WELDING MACHINE 160A EN (10 pages)
- POWXQ5220 HAMMER DRILL 520W EN (10 pages)
- POWXQ5226 HAMMER DRILL 1250W EN (9 pages)
- POWXQ5234 IMPACT DRILL 18V EN (13 pages)
- POWXQ5243 DRILL/SCREWDRIVER 12V LI-ION 2 BATT EN (13 pages)
- POWXQ5406 BELT SANDER 1200W EN (8 pages)
- POWXQ6110 HEAT GUN 2000W ELECTRONIC EN (11 pages)
- POWXQ5502 ELECTRIC PLANER 800W EN (10 pages)
- POW1010 JIGSAW 450W EN (8 pages)
- POW1015 JIGSAW 650W EN (8 pages)
- POW1520 ELECTRIC PLANER 600W EN (10 pages)
- POW4014 FINISHING SANDER 135W EN (8 pages)
- POW4060 ROTATING SANDER 480W EN (9 pages)
- POW1820 MULTITOOL 135W EN (10 pages)
- POW204 ANGLE GRINDER 500W 115MM EN (10 pages)
- POW2040 ANGLE GRINDER 500W 115MM EN (9 pages)
- POW2085 ANGLE GRINDER 710W 115MM EN (9 pages)
- POW2086 ANGLE GRINDER 900W 125MM EN (11 pages)
- POW30000 IMPACT DRILL 500W EN (16 pages)
- POW222 WALL SLOTTER 1700W EN (9 pages)
- POW30001 IMPACT DRILL 500W EN (8 pages)
- POW30050 IMPACT DRILL 710W EN (7 pages)
- POW30070 IMPACT DRILL 600W EN (7 pages)
- POW30080 IMPACT DRILL 1050W EN (7 pages)
- POW30075 IMPACT DRILL 750W EN (7 pages)
- POW302 B ENCH DRILL 350W EN (10 pages)
- POW30540 HAMMER DRILL 400W EN (8 pages)
- POW30543 HAMMER DRILL 900W EN (8 pages)
- POW30580 DEMOLITION HAMMER 1600W EN (10 pages)