Powerplus POWX1365 MINI CIRCULAR SAW 600W 85MM + MITRE GUIDE EN - Manual (Page 10)

POWX1365 EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
 Conventional tools such as keyhole saws or knives generally give excellent results, though
the plunge saw can be used if a particularly neat, dust free cut is required or if there is a
danger of cutting pipes or cables.
12 CLEANING AND MAINTENANCE
Regular cleaning is required for the safe operation of the tool, as an excessive build up of dust
will prevent the tool from operating correctly.
The dust extraction hose (b) may block and require cleaning occasionally, especially if damp
wood is being cut.
 Unplug from mains supply.
 Clean thoroughly with a small soft brush, like a paint brush.
 Keep the cooling vents on the motor housing clean and unobstructed at all times.
 Never use any caustic agents or solvents to clean the plastic parts.
12.1 Blades
 Always use a sharp blade.
 If the tool does not cut as well as expected or if it overheats (temperature cut out may trip)
the most common cause is a blunt blade.
 It is difficult to see or feel if the blade is blunt. When in doubt use a new blade.
 Blades are consumable items.
 Beware when changing blades as they can become hot during use. Allow the blade some
time to cool before replacing it.
13 TECHNICAL DATA
Rated voltage 220-240V
Rated frequency 50 Hz
Rated power 600W
Rotation speed 5500 min
-1
Blade size Ø 85 mm
Max. cutting depth soft wood 26.5 mm
Max. cutting depth tile 8 mm
Max. cutting depth aluminum 3 mm
14 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 86 dB(A)
Acoustic power level LwA 97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration): 2.8 m/s² K = 1.5 m/s²