Powerplus POWX119 DRILL /IMPACT DRILL 2100W EN - Manual (Page 4)

POWX119
EN
Copyright © 2011 VARO NV S t r a n a | 4 www.varo.com
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
4.4 Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from
intended could lead to a hazardous situation.
4.5 Service
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
5 SPECIFIC SAFETY WARNINGS
Appliances used at different locations including open air must be connected to the mains
via a current surge preventing switch.
Always wear goggles when using the machine.
It is recommended to wear gloves, sturdy non slipping shoes and appropriate work clothing.
Always wear suitable personal protective hearing equipment
Sawdust and splinters must not be removed while the machine is running.
Always disconnect the plug from the power socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always lead the cable away
behind you.
Always use the auxiliary handle, even if the machine has a safety clutch since this safety
clutch only engages when the machine blocks with a jerk.
When working in walls ceiling, or floor, take care to avoid electric cables and gas or water
pipes.