Powerplus POWX0474 ANGLE POLISHER 1200W EN - Manual (Page 8)

POWX0474
EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
10 TROUBLE SHOOTING
Should the machine fail to function correctly, a number of possible causes and the appropriate
solutions are given below:
10.1 Machine fails to operate.
 Power turned off.
 (Extension) cable damaged.
10.2 The elektromotor hardly reaches maximum speed.
 The extension cable is too thin and/or too long.
 The mains voltage is lower than 230 V.
10.3 Machine overheats.
 Air vents are blocked. Clean them with a dry cloth.
 The machine has been overloaded. Use the machine for the purpose it is made for
10.4 Excessive sparking or elektromotor runs irregular.
 There’s dirt inside the motor or the carbon brushes are worn.
 Replace the carbon brushes or bring the machine to a specialized repair centre.
Repairs and servicing should only be carried out by a qualified technician
or service firm.
11 TECHNICAL DETAILS
Model nr. POWX0474
Rated voltage AC (Un) 230V
Rated frequency (fn) 50Hz
Rated power (Pn) 1200W
Rotation speed (n) 600 – 3300min -1
Disc diameter 180mm
Spindle lock M 14
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 86 dB(A)
Acoustic power level LwA 97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration): 7.8 m/s² K = 1.5 m/s²
13 WARRANTY
 This product is warranted for a 36-month period effective from the date of purchase by the
first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.