Powerplus POWX0474 ANGLE POLISHER 1200W EN - Manual (Page 6)

POWX0474
EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
6 SPECIFIC SAFETY RULES
 Accessories must be rated for at least the speed recommended on the tool warning label.
Wheels and other accessories running over rated speed can fly apart and cause injury.
 Hold tool by insulated gripping surfaces when performing an operation where the cutting
tool may contact hidden wiring or its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the operator.
 Check the grip pad carefully for cracks, damage or deformity before operation. Replace
cracked, damaged or deformed pad immediately.
 Hold the tool firmly.
 Keep hands away from rotating parts.
 Make sure velcro grip pad and woolen fleece pad or sponge pad are not contacting the
workpiece before the switch is turned on or off.
 Do not leave the tool running. Operate the tool only when hand-held.
 Do not touch the workpiece immediately after operation; it may be extremely hot and could
burn your skin.
7 ASSEMBLY
Prior to mounting an accessory always unplug the tool.
7.1 Assembling the handle Fig. 2
The handle is suitable for either left or righthanded use.
 Install the handle in such way that the holes match the screwholes on the machine.
 Tighten the handle with the bolts and hexagon key.
7.2 Assembling accessoires Fig. 3
 Press the spindle lock (a)
 Screw and tighten the pad holder on the spindle
 Depress the spindle lock
 Mount the wanted accessorie onto the pad holder.
7.3 Accessoires Fig. 4
7.3.1 Sanding paper (1)
This is used for sanding and polishing new paints and plastics.
7.3.2 Fiber pad (2)
This is used in combination with other pads.
7.3.3 Wool polishing pad (3)
This is used for a high gloss finish. To be used in combination with the fiber pad