Powerplus POWX0076LI CIRCULAR SAW 18V LI-ION 165MM ONE FITS ALL EN - Manual (Page 6)

POWX0076LI EN
Copyright © 2013 VARO P a g e | 6 www.varo.com

Replace a broken tension spring before using the machine again.

Never remove the riving knife. The distance between the toothed rim and the riving knife
should be 5 mm maximum. The height difference between the riving knife and the
toothed rim should be 5 mm maximum.
 Do not use saw blades made of HSS steel.
 Do not use bent, deformed or otherwise damaged saw blades.
 Do not use saw blades which do not meet the specifications stated in this manual.
 Before sawing, remove all nails and other metal objects from the workpiece.
 Never start sawing before the saw reaches its full speed.
 Securely clamp the workpiece. Never attempt to saw extremely small workpieces.
 Only put the machine aside after switching off and when the saw blade has come to a
complete standstill.
 Never try to slow the saw blade down by exerting pressure on the side.
 Before performing maintenance to the machine, always unplug the machine.
 Keep hands away from cutting area and blade. Keep your second hand on auxiliary
handle or motor housing.
 Do not reach underneath the workpiece.
 Adjust the cutting depth to the thickness of the workpiece.
 Never hold piece being cut in your hands or across your leg. Secure the workpiece to a
stable platform.
 Hold power tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring.
 When ripping always use a rip fence or straight edge guide.
 Always use blades with correct size and shape .
 Never use damaged or incorrect blade washers or bolt.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
Leaser beam warning.
Laser beam characteristics.
 Warning! The laser beam potentially causes severe eye damage. Never look or stare
directly into the leaser beam.
 During use, do not point the laser beam at people, directly or indirectly through reflecting
surfaces.
 This laser complies with class 2 according to EN 60825-1:2007. The unit includes no
servicing components. Do not open the housing for any reason. If the unit is damaged,
have the damage repaired by an authorized repair agent.
8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
8.1 Batteries
 Never attempt to open for any reason.
 Do not store in locations where the temperature may exceed 40 °C.
 Charge only at ambient temperatures between 4 °C and 40 °C.
 Charge only using the charger provided with the tool.

When disposing of batteries, follow the instructions given in the section “Protecting the
environment”.