Powerplus POW706 HEAT GUN 2000W EN - Manual (Page 2)

POW706
EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
HEAT GUN 2000W
POW706
1 APPLICATION
Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding
and bending plastics as well as general drying and thawing purposes. It is not designed for
professional use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG A)
1. Switch ON/OFF
2. Air vents
3. Nozzle
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packaging and packing inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1 Heat gun
4pcs nozzles
1 Manual
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Read manual before use
In accordance with essential
safety standards of applicable
European directives Class II - The machine is double
insulated;
Earthing wire is
therefore not necessary.