Maintenance, Technical data, Noise – Powerplus POW30580 DEMOLITION HAMMER 1600W EN User Manual
Page 8: Service department, Storage

POW30580
EN
Copyright © 2014 VARO
P a g e
| 8
www.varo.com
11 MAINTENANCE
Check every day the tightening of screws and nuts. Except the procedures described in this
manual, this tool needs no specific maintenance. The repair of the tool's inner components is
of the competence of specialists. The cleaning of plastic parts is done with a soft damp cloth
and a bit of mild soap. Never submerge the tool and do not use detergents, alcohol, spirit,
etc...For an in-depth cleaning, please consult the after-sales department.
WARNING: For maintenance and cleaning, always remove the plug from
the electric power supply. Never use water or other liquids to clean
electric parts.
12 TECHNICAL DATA
Rated voltage
– rated frequency
230V~ 50Hz
Rated Power
1600W
Protection class
class II
Weight
14.7kg
Cable length
2m
Chuck type
Hex
Impact Rate
1500 beats/min
13 NOISE
Noise emission values measured according to relevant standard. (K=1.5)
Acoustic pressure level LpA
83 dB(A)
Acoustic power level LwA
104 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
18.6 m/s²
K = 1.5 m/s²
14 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
15 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.