Powerplus POW30546 HAMMER DRILL 1200W EN - Manual (Page 2)

POW30546 EN
Copyright © 2014 VARO NV P a g e | 2 www.varo.com
HAMMER DRILL 1200W
POW30546
1 APPLICATION
The hammer drill can be universally used for hammer drilling and chiselling in stone and
concrete. It is not designed for commercial use.
WARNING! For your own safety, read this manual and general safety
instructions carefully before using the appliance. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. 1)
1. Dust guard
2. Fastening sleeve
3. On-Off switch
4. Auxiliary handle
5. Cap for carton brush
6. Depth stop
7. Drill stop
8. Hammer stop
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packing and package inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packing materials as long as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 machine
3 SDS drills, A
2 chisels, B
1 13 mm key chuck + adaptor, C
1 auxiliary handle, D 1 set carbon brushes
1 dust cover, E
1 depth gauge, F
1 manual
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal injury
or damage to the tool.
Read manual before use.
In accordance with essential
safety standards of applicable
European directives. Class II - The machine is double
insulated. Earthing wire is
therefore not necessary.