Powerplus POW2087 ANGLE GRINDER 2150W 230MM EN - Manual (Page 8)

POW2087 EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
8.1.2 Switching off
 When you release the switch, the tool turns off.
 Do not let go of grinder until it has stopped running.
Warning: The wheel continues to rotate after the tool is switched off.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Lubrication
The machine requires no additional lubrication
10 FAULTS
Should a fault occur e.g. wear of a part, please contact your local Power plus dealer.
11 TECHNICAL DATA
Voltage / frequency 230-240 V / 50 Hz
Power input 2150 W
No-load speed 6500 min
-1
Disc diameter 230 mm
Spindle dimension M14
Weight 4.65 kg
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
95 dB(A)
Acoustic power level LwA 106 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration): 19.4 m/s² K = 1.5 m/s²