Powerplus POW222 WALL SLOTTER 1700W EN - Manual (Page 6)

POW222
EN
Copyright © 2013 VARO P a g e | 6 www.varo.com
9 ADJUSTING THE CHASE WIDTH
Fig 7 Fig 8
Fig 9
 The machine is supplied with two spacer rings (10mm and 15 mm). The chase width is
adjusted by varying the amount of spacer rings between the diamond cutting discs. Mind
the width of the diamond cutting discs. The maximum chase width is approximately 29mm.
 Make sure at least 5mm thread remains to tighten the outer spanner ring.
10 DUST EXTRACTION
Fig 10
The wall slotter is equipped with a dust extractor socket.
You can connect your vacuum cleaner to the socket at
the rear of the wall slotter. If you require a special
adapter, please contact the manufacturer of your
vacuum cleaner.