Powerplus POW1044 CIRCULAR SAW 1200W 185MM EN - Manual (Page 8)

POW1044 EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Checking and replacing the carbon brushes
The carbon brushes must be checked on a regular basis.
 In case of wear, replace both carbon brushes at the same time.
 After mounting new carbon brushes, let the machine run at no load for 15 minutes.
Use only the correct type of carbon brushes.
9.3 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw .
10 TECHNICAL DATA
Rated voltage 230-240V
Rated frequency 50Hz
Rated power 1200W
Rotation speed 5500min
-1
Blade size Ø 185 x Ø 20 x 1.4 (2,5) mm
Max cutting depth 65mm
Protection class Class II
Maximum cutting capacity 90° - 90° 65mm
Maximum cutting capacity 45° - 90° 43mm
Number of teeth 24teeth
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 93 dB(A)
Acoustic power level LwA 104 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 3.2 m/s² K = 1.5 m/s²