Powerplus POWXQ6104 HEAT GUN 2000W EN - Manual (Page 7)

POWXQ6104/POWXQ6110
EN
Copyright © 2011 VARO NV P a g e | 7 www.varo.com
7.1 Mounting the correct accessory
This tool is supplied with a set of accessories for different applications.
Icon
Description Purpose
POWXQ6104 & 6110
Glass protection nozzle Protecting windows
when stripping
frames
Spoon reflector nozzle Soldering pipes
Cone nozzle Welding, shrink
sleeving (heat
concentrated over
small area)
Fish tail surface nozzle Drying, thawing
(heat spread over
wider area)
POWXQ6110
Scraper Stripping paint and
varnish
Make sure that the tool is switched off and the nozzle has cooled down.
Falling down nozzle can set an object on fire. Nozzles must be mounted
firmly and secure on the unit.
Touching a hot nozzle can lead to serious burns .Before attaching or
replacing a nozzle, allow the unit to cool down completely or use a suitable
tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-
proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and damage
the unit. Use only original nozzles according to the table that are suitable
for your unit.
Set the desired accessory onto the nozzle.