beautypg.com

Operating modes, Hammer drill mode, Chisel mode – Powerplus POWXQ5226 HAMMER DRILL 1250W EN User Manual

Page 7: Technical data, Noise, Cleaning and maintenance, Cleaning

background image

POWXQ5226

EN

Copyright © 2014 VARO

P a g e

| 7

www.varo.com

9.3

Operating modes

The tool can be set at following operation modes by turning the front and rear mode selectors
to different positions

When switching operation modes, please trigger ON/OFF swich slightly.

9.3.1

Hammer drill mode

The tool produces an impact force while turning, suitable for masonry drilling, such as drilling
on concrete and bricks.

9.3.2

Chisel mode

The tool produces only impact force, suitable for chiselling on concrete and bricks.

10 TECHNICAL DATA

Mains supply

230-240 V ~ 50 Hz

Rated input

1250W

Impact rate

Max. 2800min-1

No load speed

450min-1

Connection cable

4m

Weight

± 6.8 kg

11 NOISE

Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA

95 dB(A)

Acoustic power level LwA

106 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).

aw (Vibration):

19.4 m/s²

K = 1.5 m/s²

12 CLEANING AND MAINTENANCE

Before performing any work on the equipment, pull the power plug.

12.1

Cleaning

Keep the ventilation slots of the machine clean to prevent overheating of the engine.