Powerplus POWXQ5226 HAMMER DRILL 1250W EN - Manual (Page 3)

POWXQ5226 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
HAMMER DRILL 1250W
POWXQ5226
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. SDS Max chuck
2. Dust protection cap
3. Locking sleeve
4. Depth stop
5. Auxiliary handle
6. Unlocking button
7. Operational mode selection switch
8. On/Off switch
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packing and package inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
 Keep the packing materials as far as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Rotary hammer 1250W
1 x BMC
1 x Set of replacement carbon brushes
1 x Dust protection cap
1 x Metal depth stop
1 x Grease pot
1 x Auxiliary handle SDS Max drills 16/18/22x320mm
SDS Max chisels 25x350mm
1 x flat
1 x point
1 x u
ser’s manual
1 x small XQ catalogue
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read manual before
use
In accordance with essential
requirements of the European
directive(s)
Wear hearing
protection.
Wear eye protection.