Powerplus POWAIR0310 PNEUMATIC STAPLER/NAILER EN - Manual (Page 4)

POWAIR0310 EN
Copyright © 2013 VARO P a g e | 4 www.varo.com
 when using fastener driving tools operated by compressed air, particular attention
must be paid to avoid exceeding the maximum allowable pressure;
 fastener driving tools operated by compressed air should only be operated at the
lowest pressure required for the work process at hand, in order to prevent
unnecessarily high noise levels, increased wear and resulting failures;

hazards caused by fire and explosion when using oxygen or combustible gases for
operating compressed air operated fastener driving tools.
6 TOOL USE
1. Read "Safety Warnings" before using the tool.
2. Push magazine lock lever and slide upper magazine to
open magazine.
3. Place strip of nails or staples into the magazine with the
point resting on the fastener guide. Do not load with
trigger depressed.
4. Push upper magazine back until magazine lock latches.
5. Keep the nailer pointed away from yourself and others
and connect to the hose.
6. Position the nailer nose against work piece and pull the
trigger.