Powerplus POWAIR0020 PNEUMATIC TOOL SET 5PCS EN - Manual (Page 5)

POWAIR0020 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
 Clean paint passages fully before disassembly.
 Remove fluid nozzle after removing fluid needle set or wile keeping fluid needle
pulled, in order to protect seat.
CAUTION: Never use a wire or other hard thing to dig nozzle, fluid needle,
this will cause damage. Never immerse spray gun completely in thinner or
solvent. When reassembly, always clean parts to prevent the sticking of
dust.
4.2 Washing gun

Pour remaining detergent into another container and clean detergent passage and
fluid nozzle with thinner.
 Using the soft clothes with some thinner clean the washing gun body and the surface
of container.
CAUTION: Never use corrosive detergent or homogenized hydrocarbon
solvent washing machinery parts or clean washing gun, which can
chemically react with aluminum and iron parts.
5 TECHNICAL DATA
Paint spray gun Wash & spray gun Tyre pressure and
filling gauge
Air consumption 85-142l/min 57-170l/min 142-283l/min
Air pressure 4 bar 4 bar 8 bar
6 TROUBLE SHOOTING SPRAY GUN
Symptom Problem Solution
Fluttering or spitting Material in container
is litter Add material into
container
Worn Needle packing
set Lubricate or replace
Needle packing
Fluid nozzle loose or
worn Tighten or replace fluid
nozzle
Pattern is arc Worn or loose fluid
nozzle Tighten or replace fluid
nozzle
Material build up on
air cap Remove obstructions
from holes but don't use
metal objects to clean it
Pattern is not evenly spread Material build-up on
air cap Clean or replace air cap
Fluid nozzle dirty or
worn Clean or replace fluid
nozzle
The centre of pattern too narrow Material too thin or not
enough Regulate material
viscosity