Powerplus POWAIR0020 PNEUMATIC TOOL SET 5PCS EN - Manual (Page 3)

POWAIR0020 EN
Copyright © 2015 VARO P a g e | 3 www.varo.com
 Before operating the tool, make sure all the screws & caps are securely tightened to
prevent leaking.
 Before painting, make inspection for free movement of trigger and nozzle to insure
tool can operate well.
 Never modify this tool for any applications. Only use parts, nozzles and accessories
recommended by manufactures.
3 USE
3.1 Wash gun
Use
Method of use Recommended
Pressure
Water cleaner Connect a normal water hose with the fitting
indicated with letter A in the drawing and the
compressed air supply to fitting C. Press the
trigger and direct the jet over the surface to be
washed. Maximum
Watering
plants Fill cup B with the product desired and screw it to
fitting A. Connect the compressed air supply to
fitting C. Press the trigger and direct the jet over
the surface to be watered, painted or washed. 1-2 bar
Wall paint
spraying 2-3 bar
Tough
washing 5-6 bar
Warning: Avoid the use of highly inflammable solvents. Do not use to
spray petrol. Non flammable commercial degreasers and detergents
should be used. Never use corrosive detergent.
3.2 Spray gun
Attention! When using the tool, always ensure that there are no naked
flames or flammable vapours within the work area. Always wear a
protective mask and always disconnect the tool when it is not in use.