Powerplus POW64256 CHAINSAW 2200W 400MM EN - Manual (Page 12)

POW64256
EN
Copyright © 2014 VARO P a g e | 12 www.varo.com
Damaged cable: Have repaired by Customer
Service. It is prohibited to patch the cable with
insulating tape .
Damaged switches have to be replaced by a
Customer Service workshop.
Chain brake See section “chain brake“ and “Releasing the
chain brake“
Running out of
carbon brush Change the carbon brush, ask a Customer
Service workshop
Chain does not
move Chain brake Check the chain brake, release if necessary.
Poor cutting
performance Blunt chain Sharpen the chain
Chain tension Chain wrongly fitted
Check that the chain
is fitted correctly Check the chain tension
Saw works only
with difficulty Chain tension Check the chain tension
Chain jumps off
sword
Chain becomes
hot Chain lubrication Check oil level
Check Chain lubrication
14 TECHNICAL DATA
Type POW64256
Rated voltage/frequency 230-240V~ 50Hz
Rated power 2200W
Bar length
16” (405mm)
No load chain speed 13.5m/s
Chain brake time 0.12 s
Tank capacity of lubricating oil 150 ml
Protection class II
Weight 5.0 kg
15 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 97 dB(A)
Acoustic power level LwA 108 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration) 3.7 m/s² K = 1.5 m/s²
16 STORAGE
Keep your chain saw in a safe place. The unused chainsaw should be stored clean, on a flat
surface and in a dry place which is inaccessible to children.