Powerplus POW63754 LAWNMOWER 123CC 460MM EN - Manual (Page 8)

POW63754
EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
7.8 Grass catcher bag (Fig 10)
Empty and clean the bag, make sure it is clean and ensure its meshwork is ventilated.
7.9 Deck
The underside of the mower deck should be cleaned after each use to prevent a buildup of
grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite
rust and corrosion, and may prevent proper mulching. The deck may be cleaned by tilting the
mower and scraping clean with a suitable tool (make certain the spark plug wire is
disconnected).
Do not tilt mower more then 30°. If you want to tilt it more, First drain fuel
tank completely (see 8.3).
7.10 Height adjustment instructions
Caution: do not at any time make any adjustment to lawnmower without
first stopping the engine and disconnecting the spark plug wire.
Caution: before changing mowing height, stop mower and disconnect spark
plug cable.
Your mower is equipped with a central height adjustment lever offering 7 (20-28-36-46-56-66-
75 mm) height positions.

Stop mower and disconnect spark plug cable before changing mower cutting height.
 The central height adjustment lever offers you 7 (20-27-35-45-55-65-75mm) different
height positions. (Fig 11)

To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down
to selected height.

All wheels will be in the same height of cut.
7.11 Rear cover position / grass expelling (Fig 12)
The rear cover can be used in 2 positions :
1
Cutting up and collected in the grass catcher
2 Cutting up and ejecting backwards
7.12 Mowing tips

Under certain conditions, such as very tall grass, it may be necessary to raise the cutting
height to reduce resistance ( prevent overload of the engine) and leaving clumps of grass
clippings. It may also be necessary to run the lawn mower over the area a second time.
 For extremely heavy cutting, reduce the width of cut by over lapping previously cut paths
and mow slowly.
 The pores in the cloth grass catcher can become blocked with dirt and dust and will
collect less grass. To prevent this, regularly hose down the grass catcher and let dry
before re using.

Keep the top of the engine (around the starter) clear and clean of grass clippings and
chaff. This will help engine air flow and extend engine life.
8 MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the safety level and
original performance of the machine unchanged in time.

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
Regular maintenance is essential for safety and performance