Edimax Technology BR6101 - Manual (Page 44)

Parameter
Description
Enable Port Forwarding
Enable Port Forwarding
Private IP
This is the private IP of the server behind the
NAT firewall.
Note: You need to give your LAN PC clients a
fixed/static IP address for Port Forwarding to
work properly.
Type
This is the protocol type to be forwarded. You
can choose to forward “TCP” or “UDP” packets
only or select “both” to forward both “TCP” and
“UDP” packets.
Port Range
The range of ports to be forward to the private IP.
Comment
The description of this setting.
Add Port Forwarding into the table
Fill in the "Private IP", “Type”, “Port Range” and
"Comment" of the setting to be added and then
click "Add". Then this Port Forwarding setting
will be added into the "Current Port Forwarding
44