beautypg.com

Casio PCR-272 Quick Start User Manual

Quick start guide, Please keep this sheet for future reference, Initialize your cash register

background image

D)

Turn to the “REG” position. Install the supplied 58mm paper roll

placing the paper roll into the printer well. Insert the paper into the
inlet and press

l key to set the paper.

E)

Proceed to the Next step “Setting the Date and Time”.

Prepare the tax rate of your state. If your tax table has break point, refer to page 24 of the
user’s manual.

Input the desired fl at tax rate to the appropriate department key.

A)

Turn the key to the “PGM” position.

B)

Press the

~ key.

C)

Enter tax rate.

(Example: For 6% enter “6”, 5.75% enter “5.75”.)

D)

Press the appropriate department key.

E)

Repeat step C) and D) to set other department key.

F)

Press the

s key to end tax programming.

Note: In case of setting the wrong tax rate to the key, please enter

?

and press those depart-

ment keys above, and quit this procedure by pressing

k key, and start from the begin-

ning of this procedure.

Please start with the department 2 key (taxable department). Department 1 key is initial-
ized as non taxable.

Quick Start Guide

Casio Model Numbers PCR-272, 140CR

For Programming Assistance Please Call

TOLL FREE 1-800 638-9228

Also, visit http://casio4business.com/sa/support/index_support.html

2

3

4

Initialize Your Cash Register

(See Page 9 in the User’s Manual)

Setting the Date and Time

(See Page 11 in the User’s Manual)

Setting Tax Rates

(See Page 11 in the User’s Manual)

Please keep this sheet for future reference.

A)

Insert the supplied key and

turn to the “OFF” position.

PGM

B)

Plug the power cord into an AC outlet.

REG

OFF

RF

PGM

CAL X

Z

PGM

REG

OFF

RF

PGM

CAL X

Z

PGM

~

N

S

N

D

k

Start tax program

Enter tax rate and press dept key.

Enter tax rate and press dept key.

To end the setting.

Example1: Set state tax 6% to department 2, 3 key

5

Quick Start Setup Completed!

QSG260*ES

0812-A

1

Load the Memory Protection Batteries and Paper Roll

(See Page 9 - 10 in the User’s Manual)

A)

Remove the printer cover.

B)

Open battery compart-

ment cover.

C)

Insert 3 new “AA” type batteries

in to the compartment.

6

6

To prevent to lose all of your setting and sales data, we
recommended you to install the memory protection bat-
teries.

IMPORTANT

Be sure that the plus (+) and minus (-) ends of the batteries

are facing in the directions indicated the illustration inside the
battery compartment.

No battery is included in the accessories.

REG

OFF

RF

PGM

X

CAL

Z

~

B

"B

S

M

D

k

Start tax program

Enter tax rate and press dept key.

Enter tax rate and press dept key.

To end the setting.

Example 2: Set state tax 5.5% to department 2 key and tax

7% to department 3 key

A)

Using the key marked “PGM” turn

the key to the “PGM” position.

B)

When the display shows blinking

“0”, such as

00-00-00

, enter

current date in Month, Day, Year
order.

Example: January, 8, 2010,
enter

?Z?

• Enter 6-digit, last 2 digits for year set.

(2010 –>10)

• By pressing

y key, this procedure

returns one by one.

C)

When the display shows blinking

“0”, such as

00-00

, enter

current time in Hour, Minute order.

Example: 1:18 PM, enter

ZCZ<

.

• Enter 4-digit, use 24-hour system.
• By pressing

y key, this procedure

returns one by one.

• If you want to adjust the date/time,

please refer to page 31 of the User’s
Manual.

00-00

10-00

13-00

13-10

13-18

~00

00-00-00

00-00-00
01-00-00
01-00-00
01-08-00
01-08-10
01-08-10

6

6

REG

OFF

RF

PGM

CAL

Z

X