Casio SE-C3500 Manual - Manual (Page 110)

E-110
Advanced programmings and registrations
Programming auto operation of
By using allocated key, programmed operations are performed
automatically just by pressing key. The following explains to set
the automatic operations.
Step Operation
1
Turn the Mode switch to PGM position and select [System
Setting] then press F key.
> ▪▪▪▪▪ >F
2
Enter 3 and press o key to set the register in the
programming mode.
3o
3
Enter 4- digit record number followed by 38. The “38” is the
identification code for arrangement programming. If you
enter “0000”, the register serches a vacant record number.
Then press o key.
000038o
This example is for searching a vacant ar-
rangement program number.
4
Press key.
5
Input 6-digit arrangement arrangement number and press
F key.
BBBBBBF
(Arrangement no.)
6
Input keys you wish to program automatic operations and
press key.
12x50!F
For programming to register a dozen of •0.50
dept. 01 item.
7
Press and o keys to complete the
program.
o