Earlex 3000 - Manual (Page 18)

CLEANING INSTRUCTIONS
THE SPRAY GUN MUST BE THOROUGHLY
CLEANED IMMEDIATELY AFTER USE. IF THE
PAINT DRIES INSIDE THE GUN, CLEANING WILL
BECOME MUCH MORE DIFFICULT AND MAY
RENDER THE GUN INOPERABLE. THIS IS NOT
COVERED BY GUARANTEE.
The spray gun is the same as a paintbrush, if it
is not cleaned it will go hard and can become
useless. You must therefore clean this out after
use.
GUN
● Disassemble the gun container
● Pour any residual material into its container so
●
that it can be used for the future.
● Pour a quantity of the respective thinner into
●
container, shake the gun lightly, reassemble the
●
gun, then spray this liquid through the gun. Repeat
●
this until the thinner being sprayed is coming
●
through with no traces of paint.
● Clean any traces of paint off the outside of the gun
● Clean the gasket (11) inside the gun body
18