Earlex 3000 - Manual (Page 11)

OPERATION
Fill the paint container with the material to be
sprayed. DO NOT OVERFILL. Push the fluid tube
firmly into the base of the gun body. Screw the
container onto the gun body tightly.
Place the unit onto a clean floor space, free from any
loose debris, liquids or dust sheets that could block
the motor inlet. Unwind the hose from the main
housing and connect to the back of the gun. Uncoil
the mains cable from the base of the unit and plug in.
ALWAYS KEEP THE MOTOR UNIT AS FAR AWAY
FROM THE SPRAYING AREA AS POSSIBLE TO
PREVENT PAINT CONTAMINATING THE MOTOR.
MASK ANY AREA YOU DO NOT WISH TO SPRAY.
Once you have set up ready to spray, switch on the
unit. No paint will be sprayed from the gun until the
trigger on the spray gun is pulled. Before starting any
work on spraying actual objects we suggest you
spend a small amount of time practicing on cardboard
or newspaper until you have got used to how the gun
works.
11