beautypg.com

Helpful hints – Earlex 3000 User Manual

Page 16

background image

HELPFUL HINTS

1. Evenly control the speed of movement of the spray

gun. A fast speed will give a thin coat and a slow
speed will give a heavy coat.

2. Only apply one coat at a time. If a further coat is

required follow the paint manufacturer’s
instructions for drying times.

3. If spraying small areas or objects keep the output

setting low as this will avoid excessive use of paints
and will minimise overspray.

4. When spraying large areas or objects, it is best to

use a criss-cross pattern, either from left to right
then up or down or vice-versa. This will ensure
maximum coverage (Fig. 5).

5. Avoid stopping and starting when spraying as this

can lead to too much or not enough material on a
surface.

6. To ensure edges are covered, commence spraying

just to the side of area being sprayed

7. CLEAN SPRAYER AFTER EVERY USE (SEE

CLEANING INSTRUCTIONS)

16