Casio YM-80 - Manual (Page 15)

Adjusting the Position, Elevation, and Angle
EN-14
Make adjustments so the projected image is positioned properly on the screen.
z The procedures in this section are explained assuming that you are starting from the projectors initial
factory default settings. Note required adjustments will be different if you have changed the projector’s
keystone correction or other settings.
z For information about projector operation, see the projector user’s guide.
1. Turn on the projector and project the blue screen.
2. Adjust focus.
3. Adjust the six locations shown below.
1 Projection area size adjustment
2 Projection area vertical position adjustment
3 Product vertical angle adjustment
4 Product horizontal angle adjustment
5 Projection area horizontal position adjustment
6 Projection area rotation angle adjustment
Arm
Wall anchor plate