How to assemble, Store cord, Store unit – Eureka 160 User Manual
Page 6: How to use, Power switch, Nozzle with edge kleener
HOW TO ASSEMBLE
(continued)
3. Store Cord
Pull up on the electrical cord. Push cord into cord retainer inside upper cord hook.
Wrap cord around upper and lower cord hooks. Fasten plug to electrical cord to
prevent unwinding.
4. Store Unit
Use the hole in the handle to hang the cleaner for storage.
HOW TO USE
Use this lightweight vacuum cleaner for quick and easy cleaning. Move the nozzle over
any floor covering to quickly clean dirt, lint or threads.
Power Switch
•
All models:
Push switch down to turn on.
Push switch up to turn off.
•
Models with an optional brush roll feature:
Select Floor cleaning to stop the brush roll.
Select Carpet cleaning to start the brush roll.
Nozzle with Edge Kleener
®
The nozzle turns down for regular of low profile
cleaning. Airflow under the nozzle automatically
directs suction to the edges and corners for
maximum full width cleaning.
6
Upper Cord
Hook with
Cord Retainer
Lower
Cord
Hook
3
On
Power Switch
Off
Floors
Carpets
Hang Cleaner
3
4
On