Casio QV-30 User Manual

Page 17

Sympton

Probable Cause

Action

All pages do not
appear during
auto play.

Camera is con-
nected to a TV,
but LCD monitor
contents do not
appear on TV
screen.

S o m e i m a g e s
are missing.

C a n n o t u s e
multi-page dis-
play.

Cannot protect
memory pages.

Protected memory pages
are hidden.

1. Function switch set to

REC

2. Incorrect camera-TV

connection

3. Wrong TV channel

Protected memory pages
are hidden.

Unhide protected memo-
ry pages (page 49).

1. Set function switch to

PLAY (page 33).

2. Connect correctly us-

ing the special video
cable that comes with
the camera (page 35).

3. S e l e c t t h e c o r r e c t

channel for video play-
back. See the TV’s
user documentation for
details.

Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 49).

Playback

Troubleshooting

Reference

Sympton

Probable Cause

Action

A L L D A T A I S
P R O T E C T E D !
stays on monitor
and images do
not appear.

Delete operation
does not start
w h e n D E L i s
pressed.

All buttons and
switches do not
operate.

Very bright or
very dark LCD
image

No buttons or
switches oper-
ate.

LCD monitor is
too bright or too
dark.

Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 49).

1. Unprotect the page

you want to delete
(page 48).

2. Change to a normal-

size, 1-page display
format.

Remove batteries and
disconnect the AC adap-
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an autho-
rized CASIO service pro-
vider.

Adjust the BRIGHT set-
ting (page 11).

Remove batteries and/or
unplug the AC adaptor.
Reload batteries and/or
plug in AC adaptor and try
operation again.

A d j u s t t h e B R I G H T
(brightness) setting.

Protected memory pages
are hidden.

1. A l l p a g e s a r e p r o -

tected.

2. M u l t i - p a g e d i s p l a y

(page 37) or zoom dis-
play (page 41)

Malfunction due to static
electrical charge or strong
impact

Wrong BRIGHT setting

Malfunction due to expos-
ing camera to electro-
static charge.

Incorrect BRIGHT setting

Playback

Deletion

Other

Sympton

Probable Cause

Action

C a n n o t e x -
change data be-
tween two cam-
eras

Cannot transfer
d a t a ( e r r o r
k e e p s o c c u r -
ring)

K e y s o f c o n -
nected camera
are disabled.

1. C o n n e c t c o r r e c t l y

(page 59).

2. Turn power on after

connecting cable.

3. Set function switch to

PLAY (page 33).

1. Correct the situation

and try again.

2. Correct the situation

and try again.

3. C h a n g e f u n c t i o n

switch setting of re-
c e i v i n g c a m e r a t o
PLAY (page 33).

4. The sending camera’s

p r o t e c t e d m e m o r y
pages are hidden. Un-
hide protected memory
pages by holding down
[–] while turning power
on (page 49).

5. Replace batteries or

use the AC adaptor
(page 13).

6. Securely reconnect the

cable and turn power
on.

Normal operation will re-
turn when you exit data
communications by press-
ing EXIT.

1. Incorrect cable con-

nection

2. Camera connected to

is not turned on.

3. Function switch sets to

REC.

1. S e n d i n g c a m e r a ’ s

memory is empty.

2. Receiving camera’s

memory is full

3. Receiving camera’s

function switch is in
REC position.

4. The message “ALL

DATA IS PROTECT-
ED” is on the monitor
of the sending camera.

5. Low battery (indicated

)

6. Disconnection of cable

during data communi-
cation

Connected camera op-
eration is disabled during
data communications.

Other

Troubleshooting

Reference

Messages

MEMORY FULL

All 96 memory pages are used. Pages must be de-
leted (page 50) before further recording is possible.

MEMORY EMPTY

No images are stored in memory.

Problem with internal memory. Contact your dealer or
an authorized CASIO service provider.

MEMORY ERROR
#1~#3
CONSULT THE
OWNER’S MANUAL!