Esoteric P-03 - Manual (Page 16)

16
Using the P-03 for the first time
When using the P-03 for the first time or after the P-03 has been
reset to factory defaults, it is necessary to setup the digital
outputs.
When all connections are completed, perform the following
operations. Note that no sound may be output unless the setup
required by the terminal connections are properly performed.
Turn the unit on. 1
Use the SKIP button (.//) to select digital output. 2
Press the PLAY AREA button twice to exit setup. 3
“OUT>Select” blinks on the display.
XLR, DUAL, i.LINK, RCA
The output changes with each press of the button. Select the
terminal to which the D/A converter is connected.
< Select DUAL when a dual AES device is connected to the unit
using XLR digital cables.
< ES-LINK is a proprietary Esoteric format enabling Super Audio
CD digital output. In order to output signals in ES-LINK
format, connect an Esoteric ES-LINK compliant D/A converter
(D-03 or D-01) to the two XLR terminals on the unit using XLR
digital cables, select the DUAL digital output, and play a
Super Audio CD.
If you want to change the setting, refer to the following
page.