Electrolux 44050 VI - Manual (Page 28)

Operating Instructions
28
4. Close the dishwasher door. The newly selected dishwashing cycle will
commence from the beginning.
Interrupting the dishwashing cycle by opening the dishwasher door
0 1. Open the door of the dishwasher. The dishwashing cycle will stop.
2. Close the dishwasher door. The dishwashing cycle will continue.
Cancelling the dishwashing cycle (RESET)
0 1. Open the door of the dishwasher.
2. Press function buttons 2 and 3 for approx. 1 second and keep them
pressed.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
3. Release the function buttons.
The dishwashing cycle has been cancelled.
4. Switch off the dishwasher by pressing the ON/OFF button.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes
in the upper and/or lower basket, an intelligent electronic system
adjusts the amount of water and the duration of the wash programme
to the number of dishes. By this means it is possible to wash only a few
dishes quickly and economically. At half load (6 place settings), up to
2 litres of water and 0.2 kWh of electricity are saved.