Casio CDP-130 - Manual (Page 15)

English
EN-13
Reference
Troubleshooting
Symptom Action
Included Accessories
I can’t find something that should be here. Carefully check inside all of the packing materials.
Power Requirements
Power will not turned on. Correctly attach the AC adaptor (page EN-4).
Sound
Nothing happens when I press any keyboard key. Adjust the volume setting (page EN-5).
Notes keep sounding, without stopping. Turn power off and then back on to initialize all Digital Piano settings
(page EN-5).
Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.
The volume or tone setting I made has changed. • Adjust the volume setting (page EN-5).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-5).
Output volume does not change even though is
change my keyboard touch. • Change the Touch Response setting (page EN-6).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-5).
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges. This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard. This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments. • Check and adjust the transpose (page EN-9) and tuning settings
(page EN-9).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-5).
The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page EN-8).
• Turn power off and then back on to initialize all Digital Piano
settings (page EN-5).
Computer Connection
I can’t exchange data between the Digital Piano and
a computer. • Check to make sure that the USB cable is connected to the Digital
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page EN-11).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.
CDP130_e.book 13 ページ ２０１３年１０月１６日 水曜日 午後１２時３９分