Casio CDP-130 - Manual (Page 10)

Playing the Digital Piano
EN-8
You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1.
While holding down
4
press down the
keyboard key for the first tone you want to layer
and then the key for the second tone.
Example: First press the HARPSICHORD key and then
the STRINGS key.
2.
To unlayer the keyboard, select another tone by
pressing
5
or by using the procedure under
“Selecting and Playing a Tone” (page EN-7).
The Hall function lets you instantly configure the Digital Piano
to play with the acoustic effect of a classic concert hall.
1.
Press
8
(HALL) to turn on the Hall function.
2. To turn off the Hall function, press
8
again.
• The initial default Hall function setting is off.
• The reverb setting turns off automatically whenever the Hall
function is turned on. When you turn off the Hall function,
the reverb setting will return to whatever it was before you
turned on the Hall function.
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
While holding down
4
, press a key within the
REVERB area of the keyboard to adjust the
reverb length.
• The initial default reverb setting is 6.
• Changing the reverb setting (including turning it off) while
the Hall function is turned on will turn off the Hall function.
Layering Two Tones
Using Hall
HARPSICHORD
STRINGS
Using Reverb
OFF Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
CDP130_e.book 8 ページ ２０１３年１０月１６日 水曜日 午後１２時３９分