Escalade Sports F1120 - Manual (Page 9)

9
STEP 5
1. Remove the two SCREWS [3] from the back side
of the COMPUTER[ #1]. Connect the COMPUTER
to the bracket at the end of the HANDLEBAR
POST [#8] using the two SCREWS. Firmly
tighten the screws
2. Connect the plug at the end of the SENSOR
WIRE[#2] into the back side of the
COMPUTER[#1] where is says ”SENSOR INPUT”
3. Note: You will need to install two “AA” batteries
into the computer before it will work.
.
FINISHED ASSEMBLED BIKE