Escalade Sports F1120 - Manual (Page 13)

13
user to test his(her) endurance and burst-out
strength. Within your target time, try your best
to pedal the bike as fast as you can. The
computer will automatically calculate your
average speed within the target time. As
soon as the time is up. The bike symbol
which represents the user will bump into the
bike triangle with audible alarm. And, you will
get your score shown on the top right area of
the LCD. Remember, the faster average
speed you achieve, the higher the score you
will get.
3. If you select "MANUAL" mode, press the
"MODE/ENTER" button. Then, set up your
desired exercise time by using the "UP"("+")
and "DOWN"("-") buttons. Press the "MODE/
ENTER" button again. Then, press the
"START/STOP" button to start your exercise
program. The LCD will always show the
functions and your progress.
4. Button Functions:
4.1 MODE/ENTER: To select each function and key in the preset value of each function.
4.2 UP("+") :To increase the target preset value for each function.
4.3 DOWN("-"): To decrease the target preset value for each function.
4.4 RESET:To reset the function value. To restart all the programs and functions, press this
button and hold for 4 seconds. After the 'beep' sound you can restart any procedure from
the beginning