Electrolux FM 7803 K-AN - Manual (Page 18)

Operating the appliance 18
Automatic switch off
Cooking surface
•
If after switching on the cooking surface, a heat setting is not set for a cook-
ing zone within approx. 10 seconds, the cooking surface automatically switch-
es itself off.
•
If one or more sensor fields are covered for longer than approx. 10 seconds,
e.g. by a pan placed upon it, a signal sounds and the cooking surface switches
off automatically.
•
If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel immedi-
ately switches all cooking zones off.
Induction cooking zones
•
In the case of overheating (e.g. when a saucepan boils dry) the cooking zone
automatically switches itself off. _ is displayed. Before being used again, the
cooking zone must be set to 0 and cooled down.
•
If cookware that is not suitable is used, f lights up in the display and after 2
minutes the indicator for the cooking zone switches itself off.
•
If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off automati-
cally. _ is displayed. Before being used again, the cooking zone must be set to
0.
Heat setting Switches off after
v, 1
- 2 6 hours
3
- 4 5 hours
5
4 hours
6
- 9 1.5 hours